Domestic Integrated Heat Pump HP-300-V

Electricity consumption is only used to transfer heat from the surrounding environment, such as air. The heat pump has the ability to absorb heat (not create heat) and transfer heat by means of a refrigerant, which captures the heat in the ambient air and transfers it to heat water.

  • Duplex Stainless Steel Cylinder
  • Space Saving Design
  • Appliance White Casement

Categories: , Product ID: 3726

Description

Electricity consumption is only used to transfer heat from the surrounding environment, such as air. The heat pump has the ability to absorb heat (not create heat) and transfer heat by means of a refrigerant, which captures the heat in the ambient air and transfers it to heated water.

The fan on the heat pump circulates air through the outer evaporator that acts as a heat collector. The liquid refrigerant in the evaporator absorbs the available heat in the ambient air, transforming it into gaseous refrigerant. The refrigerant gas is then pumped into a compressor. When this warmed refrigerant gas is compressed, it intensifies the heat.

This intensely hot refrigerant is then pumped into a heat exchanger condenser where the actual heat transfer takes place. As the water passes through the heat exchanger, the hot gas gives up its heat to the cooler water. The refrigerant returns to a liquid state and is pumped through an expansion valve and then into an evaporator air coil, which starts the process all over again

Features

  • The inner cylinder is manufactured from Duplex Stainless Steel, providing longevity and hygiene.
  • Polyurethane insulation between the inner cylinder and outer casement reduces heat loss.
  • Aesthetically appealing appliance white casement.
  • A vertical air discharge heat pump with highly efficient heat exchanger.
  • Includes a micro-computer with timer and temperature functions, which automatically starts and stops the heat pump according to the water temperature and the timer setting.
  • Space saving due to the integration of the cylinder and heat pump.
  • Works in all weather conditions and at night.
  • Environmentally friendly thereby reducing global greenhouse effects.

Specifications

Product Code
HP-200-V HP-300-V
Cylinder/Tank Capacity 200lt 300lt
Size Ø 600 x 1,604mm Ø 600 x 2,004mm
Net Weight 91kgs 101kgs
Heating Capacity 3.6kW
Power Supply 220-240V/50Hz/1P
Max Input Current 5.5A
Max Input Power 1.2kW
Rated Current 4.1A
Rated Input Power 0.9kW
Compressor Input Power 0.86kW
Max Exhaust Pressure of Compressor 2.85MPa
Max Suction Pressure of Compressor 0.7MPa
Max Working Pressure of Heat Exchanger 3.0MPa
Allowable Pressure of System 3.0MPa
Refrigerant R134a / 1.5kg
Fan Type Vortex
Inner Cylinder Duplex Stainless Steel
Degree of Protection IPX4
Earth Requirement ≤0.1Ω
Water Connection 3G3/4″
Duct Connection Ø 150mm
Noise Level ≤55db (A)
Hot Water Temp. Range / Default 28-75°C / 60°C
Working Ambient Temperature -7~43°C

Installation

  • Because the Integrated Heat Pump uses less than a third of the energy of a normal electric water heater (geyser), it qualifies for installation in terms of SANS 10400XA.
  • The Integrated Heat Pump must be well ventilated and installed undercover, ensuring that rain water does not fall into the air inlet/outlet.
  • The installation position should allow for condensate water discharge from the heat pump.
  • The ground surface area must be hard, smooth and even, in order to prevent any vibration.
  • The connection of the heat pump to the electrical power source, must be done by a qualified electrician.
  • The heat pump is supplied with a 400kPa Safety Valve (T & P Value) and Drain Cock.

Domestic-Integrated-Heat-Pump-Installation

Brochures

Download Brochure