600 DUAL Standard 250 Litres – For Export Only

    • The Kwikot 600 Dual is a high-pressure electric water heater and is
      SABS 600kPa approved and available in Slimline and Standard formats.
    • The inner cylinder is manufactured from 2mm steel and thermofused porcelain enamelled for cylinder
      longevity and hygiene.
    • Polyurethane insulation between the inner cylinder and outer galvanised casement
      reduces energy and heat loss.

Double anodes for additional protection against harsh water conditions are fitted
to the 250lt Standard unit.

  • The units can be installed horizontally or vertically.
Category: Product ID: 2816


Product CodeCapacity (Litres)Element Rating (kW)Operating Pressure (kPa)Mass Empty (kg)Connections (mm) (male iron)
EF250-RD2504Up to 6006520
Dimension A (mm)Dimension B (mm)Dimension C (mm)Dimension D (mm)

Installation & Warranty


The Kwikot 600 Dual must be installed in compliance with SANS 10254 Electric Hot Water
Storage Heaters with a Temperature & Pressure Valve (Safety Valve), Drain Cock (both
supplied with the water heater), Pressure Control Valve, Drip Tray and Vacuum Breakers (see back of brochure for a typical installation diagram).

The 600 Dual water heater is IPX4 rated.

The following minimum installation clearance must be allowed for on each side in the event of
having to remove the element, thermostat or the anode/s:
50lt/100lt/150lt – 450mm ; 200lt/250lt – 920mm
The 200lt and 250lt capacity units must not be wall mounted.


All Kwikot geysers come with a manufacturer’s warranty of 3, 5 or 6 years dependent of the geyser brand, providing peace of mind of possibility of defects during the warranty period.

Read the warranty manual supplied with every geyser for more information on warranty policies and periods.

Download Installation & Warranty Manual


Download Brochure